運行參數及回熱器對斯特林發動機性能的影響
陳鵬帆，朱建炳，冶文蓮
蘭州空間技術物理研究所 真空技術與物理重點實驗室
THE INFLUENCE OF OPERATION PARAMETERS AND REGENERATOR ON PERFORMANCE OF STIRLING ENGINE
CHEN Peng-fan，ZHU Jian-bing，YEWen-lian
Science and Technology on Vacuum Technology and Physics Laboratory，Lanzhou Institute of Physics

摘要：建立斯特林發動機的絕熱分析模型并介紹其數值求解方法。分析了該模型下的計算結果獲得不同運行參數（充氣壓力和運行頻率）、回熱器容積和回熱器平均溫度對系統性能的影響。結果表明，增大充氣壓力及運行頻率有助于提高系統的輸出功率；對于孔隙率一定的回熱器而言，從軸向增大其容積會使輸出功率降低；另外，回熱器平均溫度降低會使膨脹腔及壓縮腔溫度波動更為劇烈。研究結果能夠對提高斯特林發動機系統的性能提供一定指導及幫助。

關鍵詞：斯特林發動機,  絕熱模型,  運行參數,  回熱器    
Abstract：The adiabatic model of Stirling engine was built and its simulation solution method was introduced. The study analysed the effect to the Stirling engine performance of different operation parameters（the charge pressure and the operating frequency），regenerator volume and regenerator average temperature and the results were discussed. It is showed that increasing the charge pressure and operating frequency contributes to the enhancement of output power. Otherwise，increasing the volume of regenerator in axial direction which the porosity is a constant would decrease the output power. Moreover，reducing the average temperature of regenerator would lead to the more violent fluctuate of temperature of the expansion and compression space. The study could provide some guidance for the optimization of Stirling engine performance.

Key words： stirling engine    adiabatic model    operation parameter    regenerator
    
作者簡介: 陳鵬帆（1992-），男，甘肅蘭州人，碩士研究生，主要研究方向為空間斯特林發電技術

引用本文: 陳鵬帆，朱建炳，冶文蓮. 運行參數及回熱器對斯特林發動機性能的影響[J]. 真空與低溫, 2017, 23(3): 177-.
CHEN Peng-fan，ZHU Jian-bing，YEWen-lian. THE INFLUENCE OF OPERATION PARAMETERS AND REGENERATOR ON PERFORMANCE OF STIRLING ENGINE. journal1, 2017, 23(3): 177-.

文章來源：《真空與低溫》雜志2017年23卷3期

刊出日期：2017-06-28

鏈接地址：http://www.lipcast.cn:81/zkydw/CN/abstract/abstract144.shtml